-------------------------------------------------------------------------

I. NetWare Server Driver

This diskette includes a NetWare Server Driver (NE2000.LAN).  This server
driver defaults to the 802.2 frame type.  The 802.3 frame type may also be
loaded for this driver to allow 802.3 frame type workstations to login.

The server driver on this disk may be used on NetWare version 3.1x or above.
Required NLM's, for the different versions of NetWare, must be loaded on the
server.  The required NLMs for the different versions of NetWare are:

	     4.x Servers           3.11 Servers	        
	     -----------      	   ------------	 
			           PATCHMAN.NLM	 
			           LSLENH.NLM	 
	     MSM.NLM	           	 
			           MSM31X.NLM	 
	     ETHERTSM.NLM          ETHERTSM.NLM	 
	     NE2000.LAN	           NE2000.LAN    

4.x, 3.12 Servers

The server driver requires the ETHERTSM.NLM and MSM.NLM to be loaded.  If
they are not loaded, it will auto-load them (if they can be found in a search
path).  The MSM.NLM and ETHERTSM.NLM should already be in the SYS:SYSTEM
directory on the server.  The files on this disk should be used if they
are newer than the current version, already on the server.  The SYS:SYSTEM
directory is usually a search path.  Therefore, only the NE2000.LAN driver
needs to be loaded manually or via. a *.NCF file.   

If the search path is not set up correctly for some reason, each NLM can be
loaded individually as shown previously.


3.11 Servers

The server driver requires the ETHERTSM and MSM31X to be loaded.  The MSM31X
requires the LSLENH to be loaded.  LSLENH requires PATCHMAN to be loaded.
Therefore, the server driver can be loaded by following the list as shown
previously.

If the required NLM's are in a search path (such as SYS:SYSTEM), only the
following NLM's need to be loaded.

                 LSLENH.NLM
                 NE2000.LAN


The LSLENH NLM will auto-load the PATCHMAN NLM.  The NE2000 will auto-load 
the ETHERTSM.  The ETHERTSM will attempt to auto-load the MSM.  The MSM will
NOT load on a 3.11 server, but it must be present for the ETHERTSM to auto-
load the MSM31X.  After the MSM fails loading, the ETHERTSM will attempt to
auto-load the MSM31X.  If there were no errors while auto-loading (besides 
the MSM.NLM), the server driver will finish loading.  Otherwise, ensure all
required NLM's are in a search path and try again, or load them individual,
as shown in the list of required NLM's.

WARNING: You must use a newer MONITOR.NLM, such as the one provided, with
a 3.11 server. The server will otherwise abend. Do not use this MONITOR 
with 3.12 or 4.xx