SK-NET G16+ Plug and Play Ethernet Adapter
ARTISOFT LANtastic/AI 4.1 Installation
=================================================

PRE-INSTALLATION

     You should setup and diagnose the SK-NET G16+ adapter(s) by
     applying SKCONF3 before you install and/or run the NOS or
     network applications.

INSTALLATION PROCEDURE

1)   Run the LANtastic installation program.

          A:install

2)   Select "Novell NE2000 16-bit ISA bus or Compatible" for
     "Network Adapter Installed:" in the installation menu.

3)   Follow the instructions guided, by the Installation program, to
     finish the installation process.

4)   Copy the SKG16+ driver from the "SK-NET G16+ Setup diskette" to
     the Lantastic directory.

          C:> COPY A:\LANTASTI\4.X\SKG16PX.EXE C:\LANTASTI


5)   Edit "STARTNET.BAT" (usually in C:\LANTASTI).
       change,

          "NEX000 IRQ=3 IOBASE=300 16-BIT VERBOSE"

       to,
          "SKG16PX"


     This completes the installation of LANtastic/AI 4.1.




SK-NET G16+ Plug and Play Ethernet Adapter
ARTISOFT LANtastic 6.0 Installation
=================================================

PRE-INSTALLATION

     You should setup and diagnose the SK-NET G16+ adapter(s) by
     applying SKCONF3 before you install and/or run the NOS or
     network applications.


INSTALLATION PROCEDURE

1)   Run the LANtastic Installation program.

          A:install

2)   Select the "Other LANtastic Compatible Adapter" from the
     Installation menu.

          Note: If you select "Support Novell NetWare", you neither
          have to nor have a chance to select a driver for your adapter
          in this step. In this condition, you have to skip step 5
          and continue with step 6.

3)   Follow the instructions guided, by the Installation program, to
     finish the installation process.

4)   Copy the SKG16+ driver from the "SK-NET G16+ Setup diskette" to
     the LANtastic directory. (usually C:\LANTASTI).

          C:> COPY A:\LANTASTI\4.X\SKG16PX.EXE C:\LANTASTI


5)   Edit "STARTNET.BAT" (usually in C:\LANTASTI).
     To add the following line before the AILANBIO command.

          "SKG16PX"

6)   Edit the "STARTNET.BAT" in the LANtastic directory (usually in
     C:\LANTASTI).

     - Replace:

            :
          LOADHI LSL
          NRODI
            :

     with:

            :
          LOADHI LSL
          SKG16PX
            :

7)   Edit the "NET.CFG" in the LANtastic directory (usually in
     C:\LANTASTI).

     - Replace:

                 :
          LINK DRIVER NRODI
               FRAME ETHERNET_802.3
               FRAME ETHERNET_802.2
               FRAME ETHERNET_II
               FRAME ETHERNET_SNAP
                 :

     with:

                 :
          LINK DRIVER SKG16P
               FRAME ETHERNET_802.3
               FRAME ETHERNET_II
                 :

     This completes the installation of LANtastic 6.0 with "Support
     Novell NetWare".