SK-NET G16+ Plug and Play Ethernet Adapter
NDIS Driver for Microsoft LAN Manager DOS Workstation Installation
================================================================

PRE-INSTALLATION

     You should setup and diagnose the SK-NET G16+ adapter(s) by
     applying SKCONF3 before you install and/or run the NOS or
     network applications.

A. Installation Procedure for LAN Manager V2.0
--------------------------------------------------

INSTALLATION PROCEDURE

1)   Type "Setup" in Lan Manager directory (usually C:\LANMAN.DOS).
     Press <Enter>.

2)   Press <Enter>.

3)   Choose "Select Network Drivers" in "Action". Press <Enter>.

4)   Click <Other Driver> button, to install the network driver from
     "SK-NET G16+ Setup diskette" (in \MSLANMAN.DOS directory).

5)   Choose "Save" in "Action".

6)   Press <F3> to Exit.

7)   Edit the PROTOCOL.INI in C:\LANMAN.DOS.

8)   Reboot your computer.

          This completes the installation procedure.



B. Installation Introduction for LAN Manager V2.1 (or later)
-------------------------------------------------------------

INSTALLATION PROCEDURE

1)   Insert "SK-NET G16+ Setup diskette" to drive A: or B:.

1)   Type "LMSETUP" in LAN Manager directory (usually
     C:\LANMAN.DOS). Press <Enter>.

     Microsoft LAN Manger Setup will appear.

2)   Choose "Network Drivers..." in " Configuration ". Press <Enter>.

3)   Click <Add New Configs> button.

     Network Adapter Driver appears.

4)   Click <Other Driver> button. To install network driver from
     "SK-NET G16+ Setup diskette"(\MSLANMAN.DOS directory).

5)   Press the <SPACE> bar to select the protocol that you want.

6)   Click <OK> button.

     "Configuration Complete" appear.

7)   Click <Save> button.

8)   Press <F3> to exit.

9)   Press <Enter>.

10)  Edit the PROTOCOL.INI in C:\LANMAN.DOS.

11)  Reboot your computer.

     This completes the installation procedure.