SK-NET G16+ Plug and Play Ethernet Adapter
ODI Driver for Novell Netware Server (3.11, 3.12, 4.X) Installation
=====================================================================

INSTALLATION PROCEDURE

1). Login as SUPERVISOR to your server.

2). Copy all supplied NLM files you find in \NOVELL_S\311, \NOVELL\312
    or \NOVELL_S\40 directory (according to your server version) in
    "SK-NET G16+ Setup diskette" to your server SYSTEM directory.  Pay
    attension that ALL these NLM files are COPYWRITE by Novell. Please
    do not distribute these files without permission from Novell.

        e.g.
             C:\>copy a:\NOVELL_S\311\*.* C:\SERVER\SYSTEM

3). Then you have to add one of the loading sequences described in the
    AUTOEXEC.NCF template you find in 311, 3.12 or 4.x directory in
    "SK-NET G16+ Setup diskette" to your server AUTOEXEC.NCF.

4). Cross down the server and then restart it again. This time SKG16+
    will be your network card.



SK-NET G16+ Plug and Play Ethernet Adapter
ODI Driver for Novell NetWare DOS Client Installation
=====================================================

The Card comes with a SKGO program which provide a fast way to
install your PC as a NetWare workstation. It is recommended you run
the SKGO program for the NetWare DOS client installation.
Otherwise, follow the procedure below to complete the installation.


PRE-INSTALLATION

     You should setup and diagnose the SK-NET G16+ adapter(s) by
     applying SKCONF3 before you install and/or run the NOS or
     network applications.


INSTALLATION PROCEDURE

1)   Insert the "SK-NET G16+ Setup diskette" into a floppy drive (A: or B:).

2)   Make a directory (usually \NETWARE) on your hard disk (usually
     C: drive) to hold the Novell NetWare utilities.

          MD C:\NETWARE

3)   Copy these files from the "\NOVELL_W" directory of the "SK-NET G16+
     Setup Diskette" to the "\NETWARE" directory of your hard disk:

          LSL.COM
          SKG16P.COM
          IPXODI.COM
          NETX.EXE
          NET.CFG

     To copy these files, type:

          COPY A:\NOVELL_W\LSL.COM C:\NETWARE
          COPY A:\NOVELL_W\SKG16P.COM C:\NETWARE
          COPY A:\NOVELL_W\IPXODI.COM C:\NETWARE
          COPY A:\NOVELL_W\NETX.COM C:\NETWARE
          COPY A:\NOVELL_W\NET.CFG C:\NETWARE

     (You may use your versions of these programs from Novell
     instead)

4)   Check with your network administrator to make sure that the
     protocol stack (IPX protocol bound with Ethernet Frame type)
     defined in the NET.CFG file matches your network. The default
     protocol stack is:

          PROTOCOL ETHERNET_802.3

     If you are running NetWare 3.12 or 4.0X, you may have to
     change the frame type to:

          PROTOCOL ETHERNET_802.2

5)   Make sure the MAM (Media Access Module) is physically
     connected to the network. From the "\NETWARE" directory of
     your hard disk, you may load the network drivers by typing:

          LSL
          SKG16P
          IPXODI
          NETX


     If you are running NetWare 3.12 or 4.0X, you should change the
     last line from "NETX" to "VLM". (Note: You may have to install
     the VLM files by applying the "NetWare Client for DOS"
     diskettes.)



SK-NET G16+ Plug and Play Ethernet Adapter
ODI Driver for Novell Netware OS/2 Client (3.11, 3.12, 4.X) Installation
=====================================================================
   Location of Driver:     \NOVELL_W.OS2\SKG16P.SYS

   Sample Configuration Files:
   ---------------------------
      CONFIG.SYS :
         DEVICE=C:\NETWARE\LSL.SYS          ; OS/2 Requester supported
         DEVICE=C:\NETWARE\DDAEMON.SYS      ; OS/2 Requester supported
         DEVICE=C:\NETWARE\SKG16P.SYS       ; NDC supported
         DEVICE=C:\NETWARE\IPX.SYS          ; OS/2 Requester supported

      NET.CFG :
         LINK DRIVER SKG16P
              FRAME ETHERNET_802.3
              FRAME ETHERNET_802.2


INSTALLATION PROCEDURE

1)   Copy the SKG16P.SYS file into the NETWARE subdirectory of your
     hard disk from the "SK-NET G16+ Setup Diskette" A:\NOVELL_W.OS2.

2)   Add or replace the SKG16P.SYS in the CONFIG.SYS file.

3)   Edit the NET.CFG file that you copied over. Edit the file per your
     requirements (see examples above).  If there are two frame types
     listed, whichever frame type is listed first, that is the one that
     the driver will load. See above for examples.

4)   Reboot your system to get service of network.

   NOTE:
   -----
   You can bind several frame types to the IPX protocol to support
   various  configurations. Include this in the Link Driver SKG16P
   section of the NET.CFG file. A sample is shown below:

           Link Driver SKG16P

           frame Ethernet_802.3
           frame Ethernet_802.2
           frame Ethernet_II
           frame Ethernet_snap