SK-NET G16+ Plug and Play Ethernet Adapter
NDIS Driver for Microsoft Windows NT 3.1 / 3.5
=====================================================

   The following driver kit files are Copyright of SK-Schneider & Koch
   Corporation:

       NDIS.SYS
       OEMSETUP.INF
       README.TXT
       SKG16P.SYS

    +-------------------------------------------------------------------+
    |  SKG16+ driver for Intel [tm] Windows NT [tm] 3.1 / 3.5           |
    |                    - Version V1.0 -                               |
    +-------------------------------------------------------------------+

PRE-INSTALLATION

     You should setup and diagnose the SK-NET G16+ adapter(s) by
     applying SKCONF3 before you install and/or run the NOS or
     network applications.


INSTALLATION PROCEDURE

   I. Installing the SKG16+ driver for Windows NT [tm]
   -------------------------------------------------------

   1. Open the Windows NT [tm] Networks Control Program Applet (NCPA)
      from inside the Window Control Panel.

   2. Click [Add_Adapter]

   3. Select [<Other> Requires disk from the manufacturer]
      in the Add Network Adapter box

   4. Insert the "SK-NET G16+ Setup diskette" in the floppy drive

   5. Select your option
             [SK-NET G16+ (PnP)]
      from the Select OEM Option box

   6. Modify the default distribution path in the Windows NT [tm]
      Setup box to point to the floppy drive if your floppy
      drive is not drive A: then click [Continue]

   7. For SKG16+ options, a Dialog box pops up to select the:

      EtherID : If multiple SKG16+ adapters are used in system,
                you must input it.

   8. Upon completion, one of the following adapters
             [ [n]SK SKG16+ (PnP) ]
      appears in the Installed Adapter Cards list of the
      Network Setting box (n is the adapter number).

   9. Click [Close] to complete the Network Setting
      initialization.

   10. To use the mini-port driver(SKG16P.SYS) on WINDOWS NT 3.1,
       you must replace the original NDIS.SYS file with the NDIS.SYS
       file included in this directory.

        For example:

                > cd c:\winnt\system32\drivers
                > copy a:\winnt31\ndis.sys

            or

                > cd c:\winnt\system32\drivers
                > rename ndis.sys ndis.bak
                > copy a:\winnt31\ndis.sys

   11. Shutdown and reboot the system


   II. Installing multiple PnP boards
   -----------------------------------

      Repeat the procedure described in the previous paragraph.