-------------------- The SKG16+ Boot ROM ---------------------- OutLines: A. How to install Novell 3.X 4.X RPL server. B. How to install Microsoft Windows NT 3.5, 3.51 RPL server. C. How to install Microsoft LAN Manager 2.1 Remoteboot server. D. How to install IBM OS/2 LAN Server 4.0 Remoteboot server. ------------------------------------------------------------------ A. How to install Novell RPL Server 1. You must create a remote boot diskette. Copy the following files onto this boot diskette: COMMAND COM IO SYS attrib -s -h io.sys MSDOS SYS attrib -s -h msdos.sys LSL COM SKG16P COM IPXODI COM NETX EXE AUTOEXEC BAT CONFIG SYS The AUTOEXEC.BAT file should contain these lines: PATH H:\LOGIN; SET COMSPEC=H:\LOGIN\COMMAND.COM DOSKEY LSL SKG16P IPXODI NETX The CONFIG.SYS file should contain these lines: DEVICE=A:\HIMEM.SYS STACKS=9,256 DOS=HIGH,UMB FILES=30 BUFFERS=30 LASTDRIVE=G FCBS=16,8 2. Boot a workstation with at least one floppy disk drive, and login to the server as SUPERVISOR. 3. Change directory to SYS:SYSTEM 4. With the DOS boot diskette in driver A: execute the DOSGEN utility. This creates a DOS boot image file named NET$DOS.SYS. 5. Copy NET$DOS.SYS to the SYS:LOGIN directory. 6. To Remoteboot different DOS image files using RPL server Create BOOTCONF.SYS in SYS:\LOGIN directory BOOTCONF.SYS format is 0 x 00005A* = NE2000.SYS 0 x 00005A* = SKG16P.SYS (Node number) SKG16P.SYS,NE2000.SYS renamed by NET$DOS.SYS file. Note: If you do not have a BOOTCONF.SYS file, or Node number is not match in BOOTCONF.SYS Node number, the boot default will be NET$DOS.SYS. 7. Copy RBOOT.RPL and ETHER.RPL to the SYS:LOGIN directory. 8. Copy RPL.NLM to the SYS:SYSTEM directory. Note: This depends on the file server version. In the RPL developer's kit for Netware 3.11 use \RPL\NLM\311\RPL.NLM; for Netware 3.12/4.x use \RPL\NLM\40\RPL.NLM; 9. Edit the AUTOEXEC.NCF file in the SYS:SYSTEM directory. For example: File Server Name FTEST ipx internal net 831123 load NE2000 port=300 int=3 name=ftest_1 frame=ETHERNET_802.2 load NE2000 port=300 int=3 name=ftest_2 frame=ETHERNET_II load NE2000 port=300 int=3 name=ftest_3 frame=ETHERNET_802.3 load NE2000 port=300 int=3 name=ftest_4 frame=ETHERNET_Snap bind ipx to ftest_1 net=21 bind ipx to ftest_2 net=22 bind ipx to ftest_3 net=23 bind ipx to ftest_4 net=24 ; ---------- For RPL file server ----------------- load rpl bind rpl to ftest_1 ; ---------- For RPL file server ----------------- mount all load pburst set NCP PACKET SIGNATURE OPTION = 1 set immediate purge of deleted files=on load remote FRTSA load rspx load monitor 10. Shutdown the file server, and reboot it. 11. Configure the SKG16+ PnP Card to "Boot ROM Enable." Now, when the file server is running, the workstation equipped with Boot ROM on the SKG16+ card will be attached to the file server without any hard disk or floppy drive. ------------------------------------------------------------------ B. How to install Microsoft Windows NT 3.5, 3.51 RPL server 1.Installing Remoteboot Service on the Server. (a).Choose Control Panel, Network, Add Software, Remoteboot Service, Insert the NT Server CD or floppy disk as requested and follow the on-line instrustions. Note: Before installing RPL server, you must have installed DLC and NetBEUI protocol in your NT 3.5, 3.51 Server. 2.Sharing RPLFILES files and to install MS-DOS Files for Remoteboot workstation. (a).Sharing \\systemroot\rpl\rplfiles ;use File manager sharing (b).Copy all the MS-DOS 6.22 ver files to -----> \\systemroot\RPL\RPLFILES\BINFILES\DOS622 copy c:\dos\*.* V:\BINFILES\DOS622 attrib -s -h c:\io.sys attrib -s -h c:\msdos.sys copy c:\io.sys V:\BINFILES\DOS622 copy c:\msdos.sys V:\BINFILES\DOS622 attrib +s +h c:\io.sys attrib +s +h c:\msdos.sys 3.Creating Remoteboot configuration for new adapter (a).copy the MS-DOS device driver (NDIS2) for the SKG16+ PnP adapter to the \\systemroot\RPL\BBLOCK\NDIS directory (SKG16P.DOS of SKG16+ NDIS2 driver) (b).Create the directory \\systemroot\RPL\BBLOCK\NETBEUI\SKG16P and copy SKG16P.CNF, protocol.ini files. (c).Use RPLCMD utility to add a bblock record for new adapter. (d).At the MS-DOS Prompt type: NET START RemoteBoot then type: RPLCMD (e).Follow the on-line underlined options. Adapter Boot Config Profile Service Vendor Wksta [Quite] V Add Del Enum: A VendorName=00005A VendorComment=SK-NET G16+ Adapter Boot Config Profile Service Vendor Wksta [Quite] B Add Del Enum:A BootName=DOSX VendorName=00005A BbcFile=BBLOCK\NETBEUI\SKG16P\SKG16P.CNF BootCommet=DOS WindowsSize=0 Adapter Boot Config Profile Service Vendor Wksta [Quite] C Add Del Enum:A ConfigName=DOS622X BootName=DOSX DirName=DOS DirName2=DOS622 FitShared=FITS\DOS622.FIT FitPersonal=FITS\DOS622P.FIT ConfigComment=DOS 6.22 DirName3= DirName4= (f).Shutdown Windows NT 3.5 or 3.51 server, and reboot it. 4.Login as Administrator to NT 3.5 or 3.51 server. 5.To start the RemoteBoot service and Remoteboot manager (a).At the MS-DOS Prompt type "NET START Remoteboot" (b).In Network administrator, Remoteboot Manager 1.Choose Remoteboot, New Profile, created an SKG16P Profile Name. 2.Add a new workstation for SKG16+ adapter and choose an SKG16P Profile file. 6.Config the SKG16+ card "Node ID (00005A******)" and run the Boot ROM of the SKG16+ Card. Note: If the new workstation Node ID is not match for your workstation, you can use "Convert Adapters" in the Remoteboot option. ------------------------------------------------------------------ C. How to install Microsoft LAN Manager 2.1 Remoteboot server 1.Installing Microsoft OS/2 on the Hard Disk. 2.Installing Microsoft LAN Manager 2.1 in OS/2. Note: Network Driver protocol must have the Netbeui, Remoteboot protocol. 3.Installing RPL server in LAN Manager 2.1 (a).IN OS/2 Full screen mode, type RPLSETUP and choose "MS-DOS workstation". Copy files from A:\ Install LAN MANAGER for MS-DOS Remoteboot workstation? Y Install LAN MANAGER for MS OS/2 Remoteboot workstation? N Replicate Remoteboot files? N Is the above information correct (Yes, No, eXit)? Y 4.Installing MS-DOS Files for Remoteboot workstation. (a).Copy all the MS-DOS files to the ----> \\systemroot\RPL\RPLFILES\BINFILES\DOS500 attrib -s -h c:\io.sys attrib -s -h c:\msdos.sys copy c:\io.sys \\systemroot\RPL\RPLFILES\BINFILES\DOS500 copy c:\msdos.sys \\systemroot\RPL\RPLFILES\BINFILES\DOS500 attrib +s +h c:\io.sys attrib +s +h c:\msdos.sys 5.Creating remoteboot configuration for new adapter (a).Copy the MS-DOS device driver for the network adapter to the \\systemroot\RPL\BBLOCK\NDIS directory (SKG16P.DOS of SKG16+ NDIS2 driver) (b).Create the directory \\systemroot\RPL\BBLOCK\NETBEUI\SKG16P and copy SKG16P.CNF, protocol.ini files to it. (c).Add these contents to RPL.MAP file : ;boot bblock records: yyyyyyyyyyyy BBLOCK\NETBEUI\SKG16P.CNF 2 6 F ~ DOS ~SK-NET ~G16+ 00005A~ ,,,, ~ RDOSX ;default workstation records:[enable only one in each address range] 00005A?????? ?????? D FITS\DEFAULT [RPL_SERVER_NAME] S ~~~ ,,, ~RDOSX~ DEFAULT *~SK-NET G16+ ~* ~~~ ;profile and workstation records added by rplmgr: (d).In OS/2 Full Screen, type "NET" and logon supervisor to Network. 1.Choose View, Available resource, RPLFILES, Use resource, Local device [ D:] 2.In OS/2 Full Screen, type "RPLINST" !!! wait for a few minutes...... 6.Starting Remoteboot service and Remoteboot manager (a).At the MS-DOS Prompt type "NET START Remoteboot" (b).In OS/2 Full Screen, type "RPLMGR" (RPL MANAGER utility) 1 Choose Remoteboot, New Profile, created a SKG16P Profile Name. 2 Add a new workstation for SKG16+ adapter and choose the SKG16P Profile file. 7.Config the SKG16+ card "Node ID (00005A******)" and run the Boot ROM of SKG16+ Card . Note: If the new workstation Node ID is not match for your workstation, you can use "Convert Adapters" in Remoteboot option. ------------------------------------------------------------------ D. How to install IBM OS/2 LAN Server 4.0 Remoteboot server. 1.Installing IBM OS/2 in the Hard Disk. 2.Installing IBM LAN Server 4.0 in OS/2. Note: LAN Adapter and protocol support must have the IBM IEEE 802.2, NETBIOS protocol. 3.Installing RPL server in LAN Server 4.0 (a).Choose LAN Services, OS/2 LAN Services installation/Configuration Advanced, install or configure this workstation, Domain control install or remove a component, add "DOS Remote IPL Service", config DOS Remote IPL Service, add MS-DOS 5.0 OK. 4.Creating Remoteboot configuration for new adapter (a).Copy the MS-DOS device driver for the network adapter to the \\IBMLAN\RPL\DOS directory (SKG16P.DOS) and SKG16P.CNF (b).Create the directory \\IBMLAN\RPL\DOS\SKG16P and copy protocol.ini file. (c).Add these contents to RPL.MAP file : ;server records: yyyyyyyyyyyy SKG16P.CNF 3 10 A IBMLAN$ DOS ~ SK-NET ~G16+ ~FOR~PnP~ ~ ~,,,, R_SKG16P ~ ~ ; workstation records 00005A150001 SKG16P ~ SKGIMG LANS4 CNSDS2 ~ ~ ~ ,,, Z R_SKG16P ~ ~ ~ (d).logon supervisor to LAN Server 4.0 1.In OS/2 Full Screen, type "GETRPL" !!! and wait for a few minutes... 2.Choose LAN Service, LAN Requester, Definition, IPL Images STH5H500, Actions, Create, Image ID = SKG16P. 3.Definition, Machine parameters, NEW, Action, Create, Remote IPL workstation Machine ID . . . . . . . . . . . . . [ SKG16P] Description . . . . . . . . . . . . . [ SK-NET G16+ PnP Adapter] Network adapter number . . . . . . . [ 00005A150001 ] Remote IPL server . . . . . . . . . . [ F4 ] Server record identifier. . . . . . . [ F4 or R_SKG16P ] 5.Starting Remoteboot service and Remoteboot manager (a).At the MS-DOS Prompt type "NET START Remoteboot" 6.Configure SKG16+ card "Node ID (00005A150001)" and run the Boot ROM of SKG16+ Card.