Nov 1995

                        EZ-2000+ Series Ethernet Card
                   NDIS Driver for LAN SUPPORT Installation
                   =========================================

***************************************************************
* How to install EZ2000.DOS on IBM LAN Support Program v1.36  *
***************************************************************

Method #1 using EZ2000.NIF file:

1. Insert the LAN Support diskette into drive A:
2. Execute the install program.
   A:\> DXMAID [Enter]
3. One of the selection item is

      "Do you have driver diskettes?"  [Yes]

   (You can press [Space] to switch no to yes.)

4. After the LAN Support finish copying, type changes as needed to the drive
   and directory for DOS NDIS files:

   (Insert our EZ-2000+ Series driver diskette into drive A:) For example,
   A:\NDIS\DOS [Enter]

5. The installation procedure will finish after completing file copy.


Method #2 modify configuration files after you have already installed other
NICs.

Follow the instructions below to change the contents of CONFIG.SYS and
PROTOCOL.INI files.

1. Copy EZ2000.DOS to the directory where your IBM LAN Support program resides.

2. Modify the original NDIS device driver statement in CONFIG.SYS as follows:

                DEVICE = [drive]:\path\EZ2000.DOS

3. Modify the PROTOCOL.INI file as follows:

                BINDINGS = EZ200IBM_NIF
                        :
                        :
                [EZ200IBM_NIF]
                    DRIVERNAME = EZ2000$