Nov 1995

                       EZ-2000+ Series ETHERNET CARD
                     NDIS Driver Installation Overview
                     =================================

The NDIS driver programs in this disk support all EZ-2000+ Series Ethernet cards.

   Directory       Contents
   ---------       -----------------------------
   \NDIS\DOS       NDIS driver for DOS
   \NDIS\OS2       NDIS driver for OS/2

EZ-2000+ NDIS driver program for DOS follows the Microsoft's NDIS spec v2.0.1.
It could support the following popular operating system for NDIS drivers:
most popular operating systems supporting NDIS drivers:

                   3Com 3+ Open
                   Banyan Vines
                   MS LAN Manager
                   IBM LAN Server
                   IBM LAN Support Program
                   WIN/TCP Pathway
                   DEC Pathworks
                   Sun PC-NFS
                   MS Windows for Workgroups

The softwares listed above are just part of the available applications using
NDIS driver.  Newer versions of the softwares may have been released.  The
following installation procedures should serve as a good reference.  In general,
any software that uses NDIS 2.0.1 driver is functionally compatible with the
EZ-2000+ NDIS drivers provided in this diskette.

*********************************
*  NDIS PROTOCOL.INI User Guide *
*********************************

  This guide lists the available PROTOCOL.INI keywords for all NDIS device
  drivers.  Most of the keywords are optional and have default values.  The
  asterisk symbol (*) indicates the list of adapters where the keyword is
  applicable.

  IOADDRESS - This keyword specifies the base I/O port address used by the
              Network Interface Card. This value must match the base I/O address
              jumper setting on your NIC.  If this keyword is not present, the
              default value will be 300h.

  INTERRUPT - This keyword specifies the interrupt line used by the NIC. This
              value must match the IRQ jumper setting on your NIC.  If this
              keyword is not present, the default value will be 3.

  DRIVERNAME- This keyword specifies the NIC driver's name.

  NETADDRESS- This keyword specifies the node address (hex) used by your network
              interface card.  This option is used only if you want to override
              the node address burned in your NIC.  In this case, the specified
              address will be used instead of the NIC's actual node address.

  MEDIA     - This keyword specifies the media of adapter connected to the
              network. It can be AUTODETECT, TP, BNC, AUI.