Nov 1995

                         EZ-2000+ Series Ethernet Card
                   Netware Server 3.11 Driver Installation
                   =======================================

The NetWare server drivers in this diskette is organized as follows:

Directory                    Contents
-----------------            -------------------------------------------------
\SERVER\EZ2000.LAN           NetWare 3.11, 3.12 or 4.x server driver
\SERVER\*.nlm                necessary files for Netware server
\SERVER\NW311\*.nlm          necessary files for Netware v3.11
\SERVER\NW312\*.nlm          necessary files for Netware v3.12
\SERVER\NW4X\*.nlm           necessary files for Netware v4.0X/v4.1x

******************
*  SERVER SETUP  *
******************

NetWare 3.11 Server Installation
================================

1)  Copy the EZ2000.LAN and ETHERTSM.NLM from the driver diskette
    into the subdirectory of your server.

    >copy A:\netware\server\EZ2000.LAN     \NW311 <--- if nw311 is the server
     copy A:\netware\server\ETHERTSM.NLM   \NW311      subdirectory

2)  Copy all supplied NLM and LAN files to your server directory:

    >Copy A:\NETWARE\SERVER\NW311\*.*  \NW311

3)  Run SERVER.EXE from your server

4)  Edit AUTOEXEC.NCF file

    :load install
     Select <System Option>
     Select <Edit Autoexec.NCF file>

5)  Modify the server's AUTOEXEC.NCF as following.
                load c:\nw311\patchman.nlm
                load c:\nw311\lslenh.nlm
                load c:\nw311\msm31x.nlm
                load c:\nw311\ethertsm.nlm
                load c:\nw311\ez2000.lan
                bind ipx to EZ2000  net=xxxx

6)  Press <ESC> Key when edit completed
    Select <YES> to save
    Select <EXIT> to leave installation

7)  Shutdown the Server and then turn it ON again.  This time, the EZ-2000+
    driver will be installed as your network card.