Nov 1995

                        EZ-2000+ Series Ethernet Card
                   Netware Server 3.12 Driver Installation
                   =======================================

The NetWare server drivers in this diskette is organized as follows:

Directory                    Contents
-----------------            -------------------------------------------------
\SERVER\EZ2000.LAN           NetWare 3.11, 3.12 or 4.x server driver
\SERVER\*.nlm                necessary file for Netware server
\SERVER\NW311\*.nlm          necessary files for Netware v3.11
\SERVER\NW312\*.nlm          necessary files for Netware v3.12
\SERVER\NW4X\*.nlm           necessary files for Netware v4.X

******************
*  SERVER SETUP  *
******************

NetWare 3.12 Server Installation
================================

1)  Copy the EZ2000.LAN and ETHERTSM.NLM from the driver diskette
    into the subdirectory of your server.

    >copy A:\netware\server\EZ2000.LAN    \NW312 <--- if nw312 is the server
     copy A:\netware\server\ETHERTSM.NLM  \NW312      subdirectory

2)  Copy all supplied NLM and LAN files to your server directory:

    >Copy A:\NETWARE\SERVER\NW312\*.*  \NW312

3)  Run SERVER.EXE from your server

4)  Edit AUTOEXEC.NCF file

    :load install
     Select <System Option>
     Select <Edit Autoexec.NCF file>

5)  Modify the server's AUTOEXEC.NCF as following.

                  load c:\NW312\MSM.NLM
                  load c:\NW312\ETHERTSM.NLM
                  load c:\NW312\EZ2000.LAN
                  bind ipx to EZ2000 NET=xxxx

6)  Press <ESC> Key when edit completed
    Select <YES> to save
    Select <EXIT> to leave installation

7)  Shutdown the Server and then turn it ON again.  This time, the EZ-2000+
    Series ethernet card will be installed as your network card.