Nov 1995

                         EZ-2000+ Series Ethernet Card
                 Packet Driver for 3Com 3+ Share Installation
                 ============================================

Copyright (c) 1995 by Ether Corporation. All rights reserved.

*******************************************
* Packet Driver Program for 3Com 3+ Share *
*******************************************

The 3Com 3+ Share Driver Program lets you run 3Com 3+ Share on your PC with
the EZ-2000+ Series Ethernet Card.

The following files will be used in this installation:

Files         Description
-----------   -------------------------------------------------------
EZ2000.SYS    Packet driver program for EZ-2000+ Series Card
ETH.SYS       3Com 3+ Share driver program

1. Follow the installation procedure for 3Com EtherLink board.

2. Copy the program ETH.SYS from the Installation Diskette for
   the EZ-2000+ Series Ethernet card to the boot disk/diskette.
   This program will replace the program of the same file name
   (ETH.SYS) when you perform the installation procedure  in
   step 1  above.

3. In the CONFIG.SYS file on the boot disk/diskette, make sure
   you have the following two statements.  The order of these
   two statement must be as shown below.

     DEVICE = EZ2000.SYS <-d> <-w> <packet_int_no>
     DEVICE = ETH.SYS

You may now reboot and start your 3COM workstation.