Nov 1995

                         EZ-2000+ Series Ethernet Card
                       SCO UNIX LLI Driver Installation
                      ==================================

* Installation for multiple cards *
-----------------------------------

This installation is for LLI drivers of SCO UNIX with TCP/IP v.1.2x.

  1). It is allowed to install up to 4 NICs. The following is as an example:

      EZ-2000+ *4 or

      any combination of 4

  2). Support gateway function. ( routing function )

  3). Statistic function can be inspected with the following command:
      # netstat -i

  Name   Mtu   Network   Address   Ipkts  Ierrs Opkts   Oerrs Collis

  d10e0  1500  192.9.200 unix2     423     0     423     0     0
  d22e0  1500  15        unix3     423     0     423     0     0
  d20e0  1500  168.8     unix      556     0     890     0     0
  lo0    2048  170.23    localhost 180     0     180     0     0

*********************
* Install Procedure *
*********************

The following files will be used in this installation:

Files          Contents
-----------    ---------------------------------------------------
driver.o       EZ-2000+ Series Driver Program
setup          EZ-2000+ software setup program
info           Used by netconfig
init           Used by netconfig
master         Used by netconfig
node           Used by netconfig
reconf         Used by netconfig
remove         Used by netconfig
space.c        Used by netconfig
system         Used by netconfig

1. Login as root user. (On maintenance mode)

2. Put driver diskette in floppy A:(or B:) and use doscp command to copy SCO
   UNIX Driver into UNIX's directories.

        # cd /
        # doscp a:/scounix/setup /setup
    (or # doscp b:/scounix/setup /setup)
        # chmod +x /setup
        # ./setup a:
    (or # ./setup b:)

3. #netconfig
   Available options:

       1) Add a chain
       2) Remove a chain
       3) Reconfigure an element in a chain
       q) Quit                                          Select 1. Add a chain

4. Select top level of chain to Add or q to quit:       1. sco_tcp
                                                        (SCO TCP/IP for UNIX)
5. Select next level of chain to Add or q to quit:      Select d22e0
                                                        Ethernet Driver unit 0
6. Add chain sco_tcp->d22e0 (y/n):                       type 'y'

   Note:

       Add chain sco_tcp->d22e0 (y/n)
                         :
       Add chain sco_tcp->d22e1 (y/n)

       It depends on card number.

7. Enter number of media mode selection (0 1 2 3 4) [3] or 'q' to quit:  n

8. Enter the internet Address of this interface         n.n.n.n

9. Enter the netmask for this interface                 (default 255.255.255.0)

10. Does the interface use a broadcast address of all 1's (y/n)  default : y

11. Enter the broadcast address for this interface      default: n.n.n.n

12. Are these values correct ? (y/n)                    y

13. XX Pseudo ttys are currently configured, do you want to:

       1) Add Pseudo ttys
       2) Remove Pseudo ttys
       Select an option or enter q to quit [q]          q

14.Available options:

       1) Add a chain
       2) Remove a chain
       3) Reconfigure an element in a chain
       q) Quit                                          Select option: q

15. Do you want to relink to kernel now ?               y

16. Do you want this kernel to boot by default (y/n)    y

17. Do you want the kernel environment rebuilt (y/n)    y

18. Reboot unix

        # shutdown -y -g0