Nov 1995

                        EZ-2000+ Series Ethernet Card
               Windows for Workgroups V3.11 Driver Installation
               ================================================
**********************************************************
*  README for Windows for Workgroups V3.11 Installation  *
**********************************************************

The EZ-2000+ Series Ethernet LAN drivers cards for Windows for Workgroups
3.11 contained in this diskette are as follows:

\WFW311\EZ2000.386     NDIS 3.0 WFW driver for Windows for Workgroups
\WFW311\EZ2000.DOS     NDIS 2.0 DOS driver for Windows for Workgroups
\WFW311\EZODI.COM      NetWare 3.X ODI driver for Windows for Workgroups
\WFW311\NET.CFG        NET.CFG file for Windows for Workgroups
\WFW311\OEMSETUP.INF   OEMSETUP file for Windows for Workgroups
\DISK1

Installation Procedure:

(1)  When a LAN driver is installed, Windows for Workgroups will present a list
     of all available drivers.  Since there will be no EZ-2000+ Series drivers
     (EZ2000.386, EZ2000.DOS and EZODI.COM driver programs ) initially, select
     UNLIST for 3rd party adapters not in the driver list.

(2)  Windows for Workgroups will ask for the drive/path containing the EZ-2000+
     Windows for Workgroups drivers.  Insert the driver diskette in drive A and
     respond with the following

     A:\WFW311

(3)  Windows for Workgroups will attempt to locate an OEMSETUP.INF file in the
     specified path. If you have entered the path name correctly, Windows for
     Workgroups should copy the appropriate drivers to the Windows for
     Workgroups system.

(4)  At this point, the driver would have been properly copied and the
     installation would proceed to the next step.  Please refer to your
     Windows for Workgroups installation guide for correct procedures.

(5)  After the initial installation, the EZ-2000+ drivers will be permanently
     copied to the Windows for Workgroups system.  Subsequent network driver
     lists will already contain EZ-2000+ drivers.


 Note: If you can't install EZ-2000+ drivers on windows for workgroup, please
       check your windows\system subdirectory the OEMx.inf file.  If the
       OEMx.inf counter is more than 10, please delete all OEMx.inf files.